SV300-100A Housing with flange, PN 16, ISO 7005-2, EN 1092-2, 100 mm
SKU: SV300-100A
SV300-100A Housing with flange, PN 16, ISO 7005-2, EN 1092-2, 100 mm
SKU: SV300-100A
Safety valves of this type are controlled by the medium flowing through it via a pilot valve.It is preferably installed in branches of supply pipework and protects downstream parts of a system which are at risk from unacceptable excess pressure which can, for example, be caused by pumps.
SV300-100A Housing with flange, PN 16, ISO 7005-2, EN 1092-2, 100 mm
SKU: SV300-100A
Product overview
Safety valves of this type are controlled by the medium flowing through it via a pilot valve.It is preferably installed in branches of supply pipework and protects downstream parts of a system which are at risk from unacceptable excess pressure which can, for example, be caused by pumps. If the inlet pressure to the valve rises up to the set opening pressure, then the valve opens immediately to the maximum flow position. If the pressure falls to the set pressure, then the valve closes slowly to prevent pressure shock loads.
- High flow capacity
- Powder-coated inside and outside - Powder used is physiologically and toxicologically safe
- Integral control circuit and ball valves
- Integral fine filter
- No external energy required for operation
- Compact construction
- Light weight
Resources
| Approvals and Standards | DVGW, WRAS (up to 23 °C) |
|---|---|
| Flow Coefficient | 167 Kvs |
| DN Size | DN 100 |
| Connection Type | Flanged |
| Controlled Media | Drinking Water |
| Media Temperature (Max) | 80 °C |
| Nominal Pressure | PN16 |
| Opening Pressure (Min) | 3 bar |
| Opening Pressure (Max) | 15 bar |
| Operating Pressure (Min) | 0.5 bar |
| Operating Pressure (Max) | 16 bar |
| Fitting Material | Brass |
| Diaphragm Plate Material | Ductile Iron Powder Coated |
| Finish | Powder Coating |
| Control Circuit Material | High-quality Synthetic |
| Seal Material | EPDM, EPDM |
| Valve Body Material | Ductile iron |
| Valve Diaphragm Material | EPDM |
