HS10S-80FA Standard version with flanges PN16 100 micron, 80 mm

HS10S-80FA

  1. home
  2. products
  3. Water
  4. Water Treatment
  5. Filter Combination
  6. Braukmann Water station, HS10S-FA

HS10S-80FA Standard version with flanges PN16 100 micron, 80 mm

HS10S-80FA

Braukmann Water station, HS10S-FA. Water stations of this type are suitable for installations with high water demand.

HS10S-80FA Standard version with flanges PN16 100 micron, 80 mm

HS10S-80FA

Product Overview

They can be used in large residential buildings, for central water supply as well as in commercial, industrial or similar applications. The unit consists of all recommended devices for protection as check valve, reverse rinsable filter and pressure reducing valve. The check valve protects the mains water System against back pressure, back flow and back syphonage of health threatening liquids. The reverse rinsable flange filter prevents the ingress of foreign bodies, for example rust particles, strands of hemp and grains of sand and thus reduces the probability of corrosion. It contains a highly efficient reverse rinsing filtering system and can be retrofitted with the Z11AS fully automatic reverse rinsing actuator and the DDS76 differential pressure switch. The pressure reducing valves protects installations against excessive pressure from the supply. Pressurisation damage is avoided and water consumption is reduced. Additional reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation.

  • LEAD FREE: Pb content of all materials less than 0.1 %
  • Filter insert fully replaceable
  • Patented reverse rinsing system - fast and thorough cleaning of the filter with small amount of water
  • Fully automatic reverse rinsing with retrofittable automatic reverse rinsing actuator Z11AS and differential pressure switcht
  • Powder coated cast iron gives high level of corrosion protection
  • Standardised discharge connection
  • Non-rising stem for setting outlet pressure and position indicator on spring bonnet on pressure reducing valve
  • The adjustment spring is not in contact with the drinking water
  • Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure

Resources

Published:

View

Published: | PDF

Download

Published:

View

Published: | PDF

Download

Published:

View

Published: | PDF

Download

Published:

View

Published: | PDF

Download

Specifications

HS10S-80FA Standard version with flanges PN16 100 micron, 80 mm
View All

Replacement Parts

Accessories

Related products