Power Vent Valve and Control for Bradford Water Heaters
SKU: WV4460E2014/U
Power Vent Valve and Control for Bradford Water Heaters
SKU: WV4460E2014/U
This product must be installed by a qualified/licensed contractor and set up with properly calibrated test equipment. Failure to have the installation performed by a qualified professional could result in substantial property damage, and even severe personal injury or death, and Resideo will not be responsible for any damages or injuries resulting from not observing this warning.
Product Overview
- Gas regulation and manual valve features
- Intermittent spark-to-pilot ignition
- Flame supervision using flame rectification sensing through the spark rod. This flame sense circuit uses patented technology to create a robust sensing signal that is independent of AC line polarity and appliance earth grounding.
- Water temperature sensing using solid state sensors potted in a submersion well assembly
- Manually resettable High Temperature Cutout (TCO)
- Induced draft blower motor control
- Draft proving switch sensing via pressure switch
- Variable resistance flammable vapor sensor with a sensing and control algorithm to provide automatic shutdown when hydrocarbon vapors such as gasoline are detected
- Retains up to 10 fault code histories in non-volatile memory (available through the EnviraCOM™ communication port)
- Solid state setpoint adjustment over a factory preset temperature range using a linear potentiometer to provide high resolution adjustment
How to Get Started
1. Create a Pro Portal Account
INSTALLERS:
Check with your company admin to get an invite to your company's profile, then create your own account.
COMPANY ADMINS:
If your company does not have a Pro Portal yet, have your company admin sign up here.
Make sure you update your company information and simply upload your company logo.
2. Get the App
Simplify the installation for your technicians and homeowners. Download the App here.
Note: Resideo Pro App currently works with T5 & T6 smart Thermostats
3. Install
Use the Resideo Pro App to install T6 Pro Smart Thermostat in homes, which will associate those homes to your company. Then you'll be able to select which homeowners see your logo based on the pricing per household (consumer will not be charged).
